Smart Antenna

Introduction
Key Features
Parameters
Applications
Resources
Related Products
Inquiry
Blogs

Introduction

The Harxon smart antenna TS112 SE integrates a high precision GNSS module with multi-band GNSS receiver for fast convergence times and trustworthy performance, and a Harxon X-SURVEY Technology multifunctional GNSS Antenna in a single rugged housing. Either for standalone positioning or dual-frequency precise point positioning (PPP), the TS112 SE provides positioning accuracy from sub-meter to centimeter level while using the SAPCORDA Safe and Precise Augmentation (SAPA) service for various applications, so there is no need for costly hardware replacement.

Sub-meter to Centimeter Postioning Accuracy
Comprehensive GNSS Support
Wireless Bluetooth for Easy Connectivity
Patented SLIDE Technology Delivers Smooth Linear Positioning
Terrain Compensation Algorithm
IP67 Rugged Housing, Flexible Installation

Key Features

Comprehensive GNSS Support

Harxon’s TS112 SE smart antenna receives dual-frequency, multi-constellation signals from GPS, GLONASS, GALILEO, BEIDOU, and SBAS as well as L-Band signals via the SAPA augmentation service, ensuring solid satellite tracking without signal outage, even on uneven terrain.
SLIDE TECHNOLOGY

The smart antenna TS112 SE features the Harxon patented SLIDETM technology to provide smooth positioning and exceptional linear accuracy, ensuring steady and consistent positioning output even through poor satellite availability or short periods of satellite signal reception interruption.
Terrain Compensation for Maximum Accuracy

The TS112 SE also features terrain compensation algorithm that is capable of correcting deviations that caused by vehicle’s roll and pitch while working on uneven grounds or slopes. It helps users increase operation efficiency and saving cost in the field.
Rugged and Durable Design, Flexible Installations Available

The TS112 SE smart antenna adopts a compact and flat structure design. Its IP67 rating housing ensures reliable performance in harsh environment even expose to dust, rain, splash or sunlight. The antenna also simplifies the installation by providing two options and suits for various off-road vehicles.

Parameters

Performance
Connectivity
Mechaical
Environmental

Signal Received	GPS L1/L2 GLONASS L1/L2 BDS B1/B2 GALILEO E1/E5b SBAS L1 QZSS L1C/A/L1S/L2C L-Band
Horizontal Position Accuracy (RMS)	Single point 1.5m CEP DGPS 0.4m CEP SBAS 0.6m CEP SAPA(Basic) Below 1m to10cm CEP SAPA(Premium) Below 10cm CEP
Data Rate	10Hz（Max.）
Time to First Fix	Cold Start<50s Warm Start<35s Hot Start<10s Reacquisition<1s
Velocity Accuracy	0.05m/s RMS
Roll/Pitch Accuracy	<1° RMS
Time Accuracy	30ns RMS

Radio Specification
Frequency Range	410-470MHz
Operating Mode	Receive
Sensitivity	-115dBm@BER10-5,9600bps
Data Link Rate	9600bps, 19200bps
Channel Spacing	12.5kHz

Dimensions	210x155x80 mm
Weight	<600g
Connector	14pin Tyco Ampseal
Mounting	M4 Screw 4 Integrated Magnetic Mount 3
Accessories	Antenna for Radio 1 Config. Cable 1 Screwdriver 1 Data Cable 1(HJ1148, optional)
Power	Input Voltage Range +9VDC to +36VDC Minimum voltage when voltage drops: 6 VDC Power Consumption 2.5W(Typical)<10W
Status LEDs	Power RTK Status Correction Data Link

Operating Temperature	-40℃ to +70℃
Storage Temperature	-40°C to +85°C
Humidity	95% non-condensing
Vibration	GJB150.16-2009, MIL-STD-810
Compliance	CE, FCC, REACH, RoHS
Waterproof Rating	IP67